Machine specification:
Front bean hoist to enable process small size glass.
Single chip or PLC control system for option
Frequency speed adjust
Automatic thickness, angle adjustment, beveling width adjustment
High speed inducing motor. Speed 2480rppm/min.
Synchronous belt
Stainless steel water tank
Cast steel machine base
Pneumatic polishing assistant, polishing with felt wheel and cerium oxide
Aluminum glass support
Machine specification:1. Wheel number: 10PCS
2. Min. Glass size: 30X30mm
3. Glass thickness: 3-12mm
4. Bevel angle: 0-22 degree
5. Max. Bevel width: 30mm
6. Glass speed: 0.7-2.8m/min
7. Compress air consumption: 1It/min
8. Pressure: 6kg/cm2
9. Power: 30KW
10. Out dimension: 7X1X2.6m
11. Weight: 3800kg
The position of grinding wheels:
No. Name specification Quantity remark
1,2 Diamond wheel Φ150 2
3 Diamond wheel Φ150 1 Pencil edge
4, 5,6,7 Resin wheel Φ150 4
8,9,10 Felt wheel Φ130 3 Pneumatic polishing
| Model Number | YD-BM-8 | YD-BM-9 | YD-BM-10 | YD-BM-10-45 | YD-BM-11 | YD-BM-13 |
| Total nr. of spindle | 8 | 9 | 10 | 10 | 11 | 13 |
| Glass thickness(mm) | 4~12 | 3~12 | 3~12 | 3~12 | 3~12 | 3~19 |
| Min. glass size(mm) | 150× 150 | 150× 150 | 150× 150 | 30x30 | 150× 150 | 150× 150 |
| Bevel angle 0 | 0~22 0 | 0~22 0 | 0~22 0 | 0~22 0 | 0~22 0 | 0~22 0 |
| Max. bevel width(mm) | 25 | 30 | 30 | 40 | 30 | 35 |
| Glass speed(m/min) | 0.7~2.5 | 0.7~2.5 | 0.7~2.8 | 0.7~2.8 | 0.7~3 | 0.7~3 |
| Compressed air Consumption(It/min) | 1 | 1 | 1 | 1 | 1 | 1 |
| Pressure(kg/cm 2 ) | 6 | 6 | 6 | 6 | 6 | 6 |
| Power(kw | 15.5 | 16.5 | 18 | 18 | 20 | 23 |
| Outer dimension(m) | 6.5× 1× 2.6 | 6.8× 1× 2.6 | 7× 1× 2.6 | 7× 1× 2.6 | 7× 1× 2.6 | 8× 1× 2.6 |
| Weight(kg) | 2800 | 3300 | 3800 | 3800 | 4000 | 4300 |
