Air heat exchanger/Heater/Radiator for dyeing/drying/printing/laminating machine/Heater for textile dyeing machinery
Technical requirements
1. Heat exchanger is made of carbon steel Tune of φ 18× 2.0-38mm with extruded aluminium fin.
2. Surface tube NO: 8, row NO: 8rows.
3. Design pressure: 1.5MPa, design temperature: 300C.
4. Making standard: GB/T14296-93.
5. The heat exchanger is made of mult flow path
6. Connector: φ 48X3.0
7. Tube sheet is carbon steel of 4mmTHX,
Sheet above and below is carbon steel of 2mmTHX
Technical requirements
1. Heat exchanger is made of carbon steel Tune of φ 18× 2.0-38mm with extruded aluminium fin.
2. Surface tube NO: 8, row NO: 8rows.
3. Design pressure: 1.5MPa, design temperature: 300C.
4. Making standard: GB/T14296-93.
5. The heat exchanger is made of mult flow path
6. Connector: φ 48X3.0
7. Tube sheet is carbon steel of 4mmTHX,
Sheet above and below is carbon steel of 2mmTHX
